1556 East Airport Rd.
Price, UT 84501
24 hour emergency service
Mon-Fri 7:30 A.M. - 5:00 P.M.
YOU CALL, WE HAUL TM
As we repair all types of components for electrical apparatuses, we use an induction heating system where heat is created electromagnetically in the metal rather than by surface heating. Heat is induced in the metal prior to welding by placing it in an alternating magnet field created by current flow in the water-cooled induction heater cables. The induction cables are wrapped around the part to be welded and do not themselves heat up, but create eddy currents inside the part, which generate heat. This allows for more precise and uniform heating in the part.
Our Welding & Fabrication Department is responsible to design, repair, or fabricate components to OEM condition or better.
The welding department welds many different material including: steel, cast iron, aluminum, and copper (as in commutator bars).
The welding services include shield metal arc welding (SMAW), gas tungsten arc welding (GTAW), gas metal arc welding (GMAW), and flux core arc welding (FCAW).